Dwyer Mark II Model 25 Incline Manometer (Vacuum Gage)

Dwyer Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25gage provides higher ranges with more easily read increments at low readings.The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution through out its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Dwyer Mark 11 Inclined Manometer

• Wall mounted inclined manometer with screws.
• Red gauge oil
• Green and red arrows for attachment to face of manometer
• Eight feet of double column flexible tubing
  
  

  Construction and installation features:
  Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof "O" ring seals. Scales are lithograph printed on aluminum and epoxy coated.
  For stationary applications, the Mark II air velocity meters can be easily mounted on any vertical surface with the two screws provided.

  
  Installation
  Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.

  
  
  
  

  Accessories
  Included with each Mark II manometer are two tubing connectors for 1/8" pipe or sheet metal ducts, two mounting screws, 3/4 oz. bottle of indicating fluid, red and green pointer flags and complete instructions.

  The Model 25 includes 8 feet' of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage oil in transit.

Additional Information